- Code
- Minimum Order
- Price
- Price Terms
- Payment Type
- Supply
Quick Message

Our compact and low-weight reactors fully comply with the customers specifications. The high quality of our reliable products provides an outstanding capacity to withstand short circuits. Special type tests and quality control ensure safe operation while STS’s product support and service network guarantee free and easy use of the products.
Serial Reactors
Harmonic Filter Reactors
Neutral Earthing Reactors
Water Cooled Reactors
Inrush Limiting Reactors
Shunt Reactors
Starting Reactors
Line/Load Reactors
Neutral earthing Reactors: The application of neutral earthing reactors is to increase the impedance in the neutral point of a transformer or a shunt reactor. During single phase faults the reactor limits the fault current in the neutral and the restoration of the power line is improved. The design can be dry-type or oil-immersed.

Shunt Reactor: The shunt reactor compensates the capacitive generation on power lines to avoid non-controlled voltage rise especially on lightly loaded lines. The simple design and robust build-up makes the shunt reactor the most cost efficient mean to compensate the capa capacitive generation.

Smoothing Reactor: The direct current that comes from the rectifier in the DC system has superimposed harmonic components, also called ripple. The smoothing reactor is connected in series with the rectifier and the whole load current flows through it. The purpose of the reactor is to provide high impedance to the flow of the harmonic currents, reduce their magnitude and thus making the DC current more smooth.

Inrush Limiting Reactor: Damping reactors limit the inrush and outrush currents of capacitor banks. Also used in series compensation systems in the bypass/discharge circuit to limit the capacitor discharge current.

Line/Load Reactor: Reactors reduce the harmonic current dissipated by the motor speed controllers, reduce the starting current, provide silent operation for motors, limit peak current, enable fuse selection depending on nominal motor current, decreases motor temperature, reduce over voltage (dv/dt) during switch off.

Back to Top